Chromalox RTPC Installation Instructions Manual - Page 6
Browse online or download pdf Installation Instructions Manual for Cables and connectors Chromalox RTPC. Chromalox RTPC 8 pages. Power connection kit for self-regulating & constant wattage heating cables
Also for Chromalox RTPC: Installation Instructions (4 pages)
Print Page
5. Feed cables through the corresponding holes in the
box and secure box to base using all four screws.
7. Using standard electrical cutters, cut a 3/4 in long
notch out of the cable between the conductor
wires. Bare a 3/8 inch length of each conductor by
stripping off the outside insulation and the inner
black core material.
***If using CZH,CWM score the outer jacket 3/4
inch from the end of the cable and remove the
jacket. Cut off the exposed nichrome wire, pushing
any remainder back under the jacket. Separate the
buss wires and strip off the last 3/8 of the insulation
from around both buss wires.
6. Sarting from the end of the cable, unravel 2-1/2
inches of the braid. Twist the strands together to
form a pigtail.
8. Insert the bared ends of the conductors and the
braid into the openings in the terminal block.
Tighten screws firmly to hold the wires and braid in
place.
6