Chromalox RTPC Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Кабели и разъемы Chromalox RTPC. Chromalox RTPC 8 страниц. Power connection kit for self-regulating & constant wattage heating cables
Также для Chromalox RTPC: Инструкции по установке (4 страниц)

Печатать страницу

5. Feed cables through the corresponding holes in the

box and secure box to base using all four screws.

7. Using standard electrical cutters, cut a 3/4 in long

notch out of the cable between the conductor

wires. Bare a 3/8 inch length of each conductor by

stripping off the outside insulation and the inner

black core material.

***If using CZH,CWM score the outer jacket 3/4

inch from the end of the cable and remove the

jacket. Cut off the exposed nichrome wire, pushing

any remainder back under the jacket. Separate the

buss wires and strip off the last 3/8 of the insulation

from around both buss wires.

6. Sarting from the end of the cable, unravel 2-1/2

inches of the braid. Twist the strands together to

form a pigtail.

8. Insert the bared ends of the conductors and the

braid into the openings in the terminal block.

Tighten screws firmly to hold the wires and braid in

place.