BURL B16-BMB2 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Media Converter BURL B16-BMB2. BURL B16-BMB2 4 pages. Mothership

Print Page

1. GETTING STARTED

1.1 Register

Please register all serial numbers for your B16 MOTHERSHIP chassis and all Daughter Cards.

You must register to activate your warranty! Please visit: www.burlaudio.com/register.

1.2 Install Daughter Cards (If Necessary)

If the Daughter Cards have been pre-installed, skip to page 3, step 1.8.

1.3 Remove Lid

Remove 9 screws on top and 2 on each side (Image 1).

Push lid up from card slot (Image 2).

Image 1: Top view shows location of 4

screws on side before removing the lid.

1.4 Verify Jumper Settings On BMB2

Find H6 on the BMB2 Motherboard, as shown in Image 3 below.

Jumpers should be on 1 and 8 for use with B16 MOTHERSHIP.

Image 2: Push lid up.

Image 3: Locate the H6 Header

on BMB2 Motherboard. From the

rear of the chassis, BMB2 is on

the bottom left. The H6 Header is

highlighted.

For B16, jumpers must be on 1

and 8.