AquaPix W5012 Splash Manual - Page 3

Browse online or download pdf Manual for Digital Camera AquaPix W5012 Splash. AquaPix W5012 Splash 3 pages.

Print Page

8. System requirement

Operating system

Win XP, Vista, Win7, Win8, Win10, Mac OSX 10.6.8 or above

CPU

Pentium 4 / 3.0G or faster recommended

RAM

1 GB MB RAM (Vista: 2 GB)

Interface

USB port

CD ROM Driver

9. Troubleshooting

Problem

Cause

Cannot turn on the camera

Low battery power.

Battery placed at wrong

polarities.

Photos can not be saved

The memory card hasn't

when taking pictures.

been formatted properly.

Cannot find removable disk

Connection failure.

after connecting the

camera to the computer

Flash does not work.

Battery power is too low.

The batteries used up very

Incorrect or old, used up,

fast.

battery

The photos are blurry

1. The camera is not held

steadily

2. The lens of camera is

dirty.

HOW TO OPEN THE BATTERY

COMPARTMENT OF THE CAMERA

Push the release lever toward the rear of the camera.

At the same time place your fingernail under the cover in the middle of the camera and slide the

compartment to the outside.

The battery compartment cover can now be hinged upward.

DECLARATION OF CONFORMITY

easypix herebly declares that the product W5012 is in conformity to all the

essential requirements of Directive 1999/5/EC. The declaration of conformity can be downloaded here:

http://www.easypix.info/download/pdf/doc_w5012.pdf

For technical support please visit www.easypix.eu.

Only EU

Solution

Replace or install the battery

correctly.

Format the memory in setup

mode of the camera. Please

refer to section 5.3.

Make sure all cable connections

are secured and restart the

computer if necessary.

Replace with new 2 x AAA

alkaline batteries

Replace with 2 x AAA alkaline

batteries

1. Hold the camera steadily

when taking video or photo.

2. Clean the lens with soft dry

cloth.