Aquasana AQ-UV-L330C Owner's Manual - Page 12

Browse online or download pdf Owner's Manual for Water Filtration Systems Aquasana AQ-UV-L330C. Aquasana AQ-UV-L330C 20 pages. Whole house uv filter

Print Page

INSTALLATION STEPS

Insert UV Lamp

Always hold UV Lamps by their ceramic ends, not by

the Lamp bulb. Again, use cotton gloves for this step.

Remove the UV Lamp from its packaging.

Insert the UV Lamp into the UV Reactor.

NOTE: DO NOT touch the key's exposed contacts.

UV Lamp Connection

1. Plug the UV Lamp Connector

into the UV Lamp. Note the

keying for proper alignment.

2. Insert the UV Lamp Connector

into the Gland Nut and turn

the connector approximately

¼ turn to lock the Connector

to the Gland Nut.

Ground Screw Connection

Tighten the captive ground screw to

the ground lug on the UV Reactor using

a Phillips Head Screwdriver to ensure

proper grounding as shown.

Plug-In UV Filter

Your system is now ready to be plugged into the appropriate GFCI

protected outlet. Refer to the following System Disinfection section

before any water is allowed to flow through the system.

WARNING