3B SCIENTIFIC PHYSICS 1000762 Instruction Manual - Page 4
Browse online or download pdf Instruction Manual for Laboratory Equipment 3B SCIENTIFIC PHYSICS 1000762. 3B SCIENTIFIC PHYSICS 1000762 18 pages. Pendulum rod with angle sensor
Print Page3B SCIENTIFIC ® PHYSICS
1000762 (115 V, 50/60 Hz)
1000763 (230 V, 50/60 Hz)
Instruction manual
10/23 ALF/UD
1. Safety instructions
Caution: The pendulum is equipped with a heavy
bob and two sharp needle bearings, meaning
there is a risk of injury.
Make sure the pendulum is resting in a safe
and secure location.
The pendulum bob always needs to be se-
cured against falling by means of the knurled
screw.
When setting up the pendulum, always make
sure that both needle bearings are correctly
situated in the groove.
Pendulum Rod with Angle Sensor
Bearing arrangement for rod pendulum with angle
sensor (magnified detail)
1 Rod pendulum
2 Pair of magnets
3 Needle bearing
4 Adjustment screw
5 Bearing rod with built-in Hall sensor
6 Offset adjustment knob
7 Angle sensor
8 BNC socket (not visible)
9 Power supply lead
2. Description
The rod pendulum with angle sensor is designed
for investigating simple harmonic oscillations of a
weighted pendulum. It is also possible to investi-
gate coupled oscillations with the addition of a
second pendulum and a coupling spring.
The pendulum consists of a flat rod with a U-
shaped bracket into which two needle bearings
are screwed. There are two permanent magnets
on the inside of the bracket arms. The pendulum
fits into a bearing rod with a V-shaped groove,
which is attached to a stand rod by means of a
universal clamp. The two points of contact for the
needle bearings are indicated by circular
1