AQUASONIC AC339 Installation Manual - Page 4

Browse online or download pdf Installation Manual for Speakers AQUASONIC AC339. AQUASONIC AC339 10 pages. Underwater loudspeakers

Print Page
AQUASONIC AC339 Installation Manual
AQUASONIC FLOATING INSTALLATION
3
Underwater Speaker Cable
4
Strain Relief Openings
3
Aquasonic
Wire Float
Tether Eyelet
1. Remove speaker from packaging.
2. Remove 8-wire floats from top of styrofoam packing.
3. Slide wire floats (8) onto speaker wire, as needed.
4. Attach optional nylon rope of desired length to tether
eyelet hole in rubber ring flange. Tether/nylon rope can
be purchased at pool supply or hardware store.
5. Hook up to stereo (100 - 200 watts recommended).
6. Enjoy!
If speaker shuts off, turn off for approximately 45 seconds to
allow internal protection circuit to reset. Turn down volume.
Use same underwater cable with waterproof connector to
extend cable—extra cable available from Clark Synthesis.
Suggested Final Assembly Using Wire Floats
To Stereo System.