AQUASONIC AC339 Installatiehandleiding - Pagina 4
Blader online of download pdf Installatiehandleiding voor {categorie_naam} AQUASONIC AC339. AQUASONIC AC339 10 pagina's. Underwater loudspeakers
Pagina afdrukken
AQUASONIC FLOATING INSTALLATION
3
Underwater Speaker Cable
4
Strain Relief Openings
3
Aquasonic
Wire Float
Tether Eyelet
1. Remove speaker from packaging.
2. Remove 8-wire floats from top of styrofoam packing.
3. Slide wire floats (8) onto speaker wire, as needed.
4. Attach optional nylon rope of desired length to tether
eyelet hole in rubber ring flange. Tether/nylon rope can
be purchased at pool supply or hardware store.
5. Hook up to stereo (100 - 200 watts recommended).
6. Enjoy!
If speaker shuts off, turn off for approximately 45 seconds to
allow internal protection circuit to reset. Turn down volume.
Use same underwater cable with waterproof connector to
extend cable—extra cable available from Clark Synthesis.
Suggested Final Assembly Using Wire Floats
To Stereo System.