AquaStar Statztruck Installation Manual - Page 3

Browse online or download pdf Installation Manual for Swimming Pool Vacuum AquaStar Statztruck. AquaStar Statztruck 12 pages. Automatic suction pool cleaner

Print Page

step 1: connectinG and submerGinG the hoses and cleaner

There are seven connector hoses. The hose cuff on any of the hose sections connects to the top of

the StarzTruck automatic pool cleaner (see Fig. 1).

Connect the StarzTruck automatic pool cleaner hose sections together by pushing and twisting the tapered

male connector end of each hose firmly into the open female end of the adjacent hose section (see Fig. 2).

Depending on the size and shape of your pool, all hose sections might not be used. The hose should reach

from the skimmer or safety vacuum lock wall fitting (AquaStar p/n VLK15Txx) to the furthest point in the

pool plus one extra hose section. If the hose is not long enough, it will be necessary to purchase additional hose

sections from your pool dealer. After the correct hose length has been assembled, fill the hose completely with

water by lowering the attached StarzTruck automatic pool cleaner and then vertically pushing the hose down,

allowing all the air to escape. When the hose is full, remove the StarzTruck automatic pool cleaner from the

hose and insert the flow gauge into the leader hose. Make sure the flow gauge is under water (see Fig. 3).

If optional leaf canister (AquaStar p/n HWN152) is purchased, install between first and second hose sections

(see Fig. 4).

First hose section

To skimmer or vac-lock

Pool deck / coping

Fig. 3

Fig. 1

First hose section

Skimmer

To StarzTruck

Second hose section

Fig. 2

(showing leaf canister)

Fig. 4