AquaStar Statztruck Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Пылесос для плавательных бассейнов AquaStar Statztruck. AquaStar Statztruck 12 страниц. Automatic suction pool cleaner

AquaStar Statztruck Руководство по установке
step 1: connectinG and submerGinG the hoses and cleaner
There are seven connector hoses. The hose cuff on any of the hose sections connects to the top of
the StarzTruck automatic pool cleaner (see Fig. 1).
Connect the StarzTruck automatic pool cleaner hose sections together by pushing and twisting the tapered
male connector end of each hose firmly into the open female end of the adjacent hose section (see Fig. 2).
Depending on the size and shape of your pool, all hose sections might not be used. The hose should reach
from the skimmer or safety vacuum lock wall fitting (AquaStar p/n VLK15Txx) to the furthest point in the
pool plus one extra hose section. If the hose is not long enough, it will be necessary to purchase additional hose
sections from your pool dealer. After the correct hose length has been assembled, fill the hose completely with
water by lowering the attached StarzTruck automatic pool cleaner and then vertically pushing the hose down,
allowing all the air to escape. When the hose is full, remove the StarzTruck automatic pool cleaner from the
hose and insert the flow gauge into the leader hose. Make sure the flow gauge is under water (see Fig. 3).
If optional leaf canister (AquaStar p/n HWN152) is purchased, install between first and second hose sections
(see Fig. 4).
First hose section
To skimmer or vac-lock
Pool deck / coping
Fig. 3
Fig. 1
First hose section
Skimmer
To StarzTruck
Second hose section
Fig. 2
(showing leaf canister)
Fig. 4