Aquasub engineering AQUA GROUP AQUATEX AV Series Operation Manual - Page 5

Browse online or download pdf Operation Manual for Water Pump Aquasub engineering AQUA GROUP AQUATEX AV Series. Aquasub engineering AQUA GROUP AQUATEX AV Series 15 pages.

Print Page
Inspect the purchased pump for damage or leakage during
transportation. And make sure all bolts and nuts are tightened
properly.
A typical installation diagram is shown below. Please
follow the given installation precautions before and during
installation.
Pump should be positioned as shown in figure-A. Pump
should be installed in a protected environment, not
exposed to weather. Provide sufficient space around the
pump for motor cooling and accessibility, refer figure-B.
5
2
1
3
No.
1
Pipe support: Support piping system properly to avoid stresses on connections.
Isolating valves: Install isolating valves for easy access- before the pump intake and after
2
the pump discharge.
Use flexible piping on both input and output sides of the pump to reduce vibration and
3
transmission of noise.
Check valves will prevent return flow of pumped liquid when pump is stopped, reducing
4
the danger of pump damage.
Control Panel: Use high quality components. Make sure that the panel conforms to local
5
standards and regulations.
6
Do not place elbows next to the pump intake and discharge.
If pump needs to be operated with isolating valve closed, install a by-pass line to avoid
7
damaging the pumping system.

INSTALLATION PRECAUTIONS

PRODUCT INSPECTION
TYPICAL INSTALLATION
4
2
3
A
6
1
Description
B
7