Panasonic BB-HCM580A Integration Note

Browse online or download pdf Integration Note for Digital Camera Panasonic BB-HCM580A. Panasonic BB-HCM580A 10 pages. Power over ethernet (poe) zoom mpeg-4 network camera
Also for Panasonic BB-HCM580A: Operating Manual (4 pages)

Print Page
Panasonic BB-HCM580A Integration Note
OneHome™
Management and Control Solutions
Manufacturer:
Model Number(s):
Comments:
Document Revision Date:
NOTE: This document refers to Camera setup in software versions below 5.2 ONLY.
Please see the Rev 5.2 Integration Note for systems running 5.2 or greater.
O
VERVIEW AND SUPPORTED FEATURES
T
BB-HCM580/581A'
HE
Pan / Tilt / Zoom: The camera can be turned to see various locations and zoom in and out.
Presets: These cameras support presets, allowing the user to store predefined locations such as a
driveway or pool. This feature requires OneHome software version 4.0 or later.
Motion Detection: These cameras support motion detection to trigger events in the OneHome system.
Video Out: The camera includes an analog video output, which can be connected to an analog DVR to
provide separate recording, or to a TV modulator to enable camera viewing on a television.
Image Flip: The camera can be mounted with its base up or down, and the image will appear normal.
T
C
DO NOT
HESE
AMERAS
Input/Output: These cameras include an I/O connector for sensor inputs and alarm outputs. These are
not supported by the OneHome system at this time.
HomeLogic LLC ●
Panasonic
BB-HCM580A/581A
OneHome version 4.0.1310 or newer, Network Camera (version 3.10)
5/19/2011
S SUPPORT THE FOLLOWING FEATURES
SUPPORT THE FOLLOWING FEATURES
●
100 Hoods Lane
Marblehead, MA 09145
Camera Integration Note
:
:
●
Phone (781) 639-5155
●
Fax (781) 639-9677