Panasonic BB-HCM580A Integration Note - Page 10

Browse online or download pdf Integration Note for Digital Camera Panasonic BB-HCM580A. Panasonic BB-HCM580A 10 pages. Power over ethernet (poe) zoom mpeg-4 network camera
Also for Panasonic BB-HCM580A: Operating Manual (4 pages)

Print Page

OME

OGIC

ONFIGURATION

The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.

In the table below:

"<User Defined>", etc.

Devices

Variable Name

Communication Device

N/A (See Note 1)

Video Cameras

Name

Device Type

Location

IP Address

Port

UserName

Password

Low-Res Panning

Flip Image 180

Hide Resolution Control

Hide Full Screen Control

Default Resolution

Goto Preset when Idle

Record Resolution

Record Tolerance

Motion Detect

Software Motion Trigger

Notes:

1. No Communication Device is needed: just add Video Cameras.

2. By default, set the first camera to 192.168.0.80, the second to 192.168.0.81, and so on.

ETAILS

Type in the desired name for the item.

Setting

N/A (See Note 1)

Panasonic KX-HCM280A

<User Defined> (Not Required)

<User Defined> (Default: 192.168.0.80) (See Note 2)

<User Defined> (Default: Administrator)

<User Defined> (Default: password)

<Select> (Default: <No>)

<Select> (Default: <Auto>)

<Select> (Default: <NONE>)

<Select> (Default: <Don't Change>)

<Select> (Default: 0% (Keep All Frames))

<Select> (Default: Disabled)

<Select> (Default: 50%)

Comments

Typically left at 80

Set to YES if camera is inverted

Camera will Pan/Tilt/Zoom as applicable to a certain preset when no streams active.

Don't Change will default to last active resolution, or set a specific resolution for recording

Higher will discard frames with no motion to conserve disk space

Enable to trigger event maps when motion detected (DVR)

Lower is more sensitive.

10 of 10