HP 316095-B21 - StorageWorks Edge Switch 2/24 Instructions Manual - Page 11

Browse online or download pdf Instructions Manual for Switch HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 pages. Edge switch release notes
Also for HP 316095-B21 - StorageWorks Edge Switch 2/24: Update Manual (9 pages), Manual (41 pages), Manual (40 pages), Release Note (32 pages), Release Note (27 pages), Manual (26 pages), Release Note (27 pages), Release Note (25 pages), Installation Instructions Manual (24 pages), Release Note (23 pages), Release Note (23 pages), Release Note (22 pages), Release Note (23 pages), Release Note (19 pages), Release Note (19 pages), Release Note (18 pages), Release Note (17 pages), Upgrade Instructions (16 pages), Instructions Manual (16 pages), Installation Instructions Manual (16 pages), Release Note (16 pages), Release Note (17 pages), Release Note (17 pages), Release Note (11 pages)

Print Page
HP 316095-B21 - StorageWorks Edge Switch 2/24 Instructions Manual

1 Flexport upgrade instructions

These instructions describe how to upgrade the Edge Switch 2/24 by installing the flexport upgrade kit.
Each flexport upgrade kit contains:
•
Eight small form-factor pluggable (SFP) transceivers.
•
These upgrade instructions.
•
A transaction code for obtaining a software license key (feature key).

Unpacking and inspecting the SFP transceivers

Unpack and inspect the optics as follows:
1.
Inspect the shipping container for damage caused during transit. If a container is damaged, ensure
that a representative from the freight carrier is present when the container is opened.
2.
Unpack the shipping container and inspect each item for damage. Ensure that all items listed on the
enclosed bill of materials are included in the container.
3.
If any items are damaged or missing, contact a Hewlett-Packard authorized service provider or
reseller.

Upgrading the Edge Switch 2/24

This section describes how to upgrade the Edge Switch 2/24 from 8 to 16 ports and from 16 to 24 ports.
When you receive the switch, ports 0 through 7 are populated

Upgrading to 16 ports

To upgrade to 16 ports:
1.
Insert eight new SFP transceivers into ports 8 through 15
Ports 0 through 15 are now populated.
Figure 1 Edge Switch 2/24 port locations
2.
If you have additional ports to upgrade, continue with
have no additional ports to upgrade, go to
(Figure
1, reference 3).
(Figure
1, reference 2).
"Upgrading to 24
"Obtaining a feature
key" on page 12.
Edge Switch 2/24 Flexport upgrade instructions
ports" on page 12. If you
11