HP 489183-B21 - InfiniBand DDR Switch Installation Manual - Page 11
Browse online or download pdf Installation Manual for Switch HP 489183-B21 - InfiniBand DDR Switch. HP 489183-B21 - InfiniBand DDR Switch 22 pages. Hp blc 4x ddr infiniband gen 2 switch installation guide
Also for HP 489183-B21 - InfiniBand DDR Switch: Frequently Asked Questions (4 pages), Using Manual (15 pages)
Print Page
2 Hardware Installation
This chapter contains the following sections:
•
Installing the HP BLc 4X DDR InfiniBand Gen 2 Switch
•
Installing InfiniBand cables in the HP BLc 4X DDR InfiniBand Gen 2 Switch
•
Cable Management
•
InfiniBand subnet managerment
2.1 Installing the HP BLc 4X DDR InfiniBand Gen 2 Switch
To install the HP BLc 4X DDR InfiniBand Gen 2 Switch, follow the steps in
Section
2.1.2.
Caution:
All panels and doors should be in place and securely fastened while the unit is in operation for
proper cooling and for EMI emissions control.
2.1.1 Prepare the Interconnect Module Bay in the HP BladeSystem c7000 Enclosure
To prepare the interconnect module bay in the HP BladeSystem c7000 enclosure, follow these
steps:
1.
Remove any devices or blanks.
2.
To remove the divider, press the divider release button (see callout 1 in
the divider out of the interconnect module bay (see callout 2 in
Figure 2-1 Removing a Divider from the HP BladeSystem c7000 Enclosure Interconnect Module Bay
The following list describes the callouts shown in
1.
Press the divider release button.
2.
Slide divider out from the interconnect module bay.
(Section
2.3)
(Section
2
1
(Section
2.4)
Figure
2-1:
2.1 Installing the HP BLc 4X DDR InfiniBand Gen 2 Switch
2.1)
(Section
2.2)
Section 2.1.1
and
Figure
2-1) and slide
Figure
2-1).
11