HP StorageWorks 2/140 - Director Switch Installation Instructions Manual - Page 18

Browse online or download pdf Installation Instructions Manual for Switch HP StorageWorks 2/140 - Director Switch. HP StorageWorks 2/140 - Director Switch 22 pages. Director power cord advisory instruction
Also for HP StorageWorks 2/140 - Director Switch: Release Note (27 pages), Release Note (24 pages), Release Note (20 pages), Release Note (13 pages), Release Note (11 pages), Release Note (10 pages), Instruction (1 pages)

Print Page
HP StorageWorks 2/140 - Director Switch Installation Instructions Manual
Installation Instructions

Attaching the Mounting Hardware to the Director 2/140

Use these steps to secure the mounting hardware to the Director 2/140.
NOTE: All mounting brackets are attached to the Director 2/140 using 10/32 x 3/8-inch flathead
countersunk Phillips screws.
1. Locate the two front mounting brackets in the shipping carton.
2. Secure the front mounting brackets on either side of the Director, as shown in
Figure
4. For each front mounting bracket, use three screws.
Figure 4: .Securing the front mounting brackets to the Director 2/140
3. Locate the two rear mounting plates in the shipping carton.
4. Secure the two rear mounting plates to each side of the Director, as shown in
Figure
4. For each plate, use three screws.
8
director 2/140 rack mount kit installation instructions