HP StorageWorks 2/140 - Director Switch Kurulum Talimatları Kılavuzu - Sayfa 18

Anahtar HP StorageWorks 2/140 - Director Switch için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. HP StorageWorks 2/140 - Director Switch 22 sayfaları. Director power cord advisory instruction
Ayrıca HP StorageWorks 2/140 - Director Switch için: Yayın Notu (27 sayfalar), Yayın Notu (24 sayfalar), Yayın Notu (20 sayfalar), Yayın Notu (13 sayfalar), Yayın Notu (11 sayfalar), Yayın Notu (10 sayfalar), Talimatlar (1 sayfalar)

Sayfayı Yazdır
HP StorageWorks 2/140 - Director Switch Kurulum Talimatları Kılavuzu
Installation Instructions

Attaching the Mounting Hardware to the Director 2/140

Use these steps to secure the mounting hardware to the Director 2/140.
NOTE: All mounting brackets are attached to the Director 2/140 using 10/32 x 3/8-inch flathead
countersunk Phillips screws.
1. Locate the two front mounting brackets in the shipping carton.
2. Secure the front mounting brackets on either side of the Director, as shown in
Figure
4. For each front mounting bracket, use three screws.
Figure 4: .Securing the front mounting brackets to the Director 2/140
3. Locate the two rear mounting plates in the shipping carton.
4. Secure the two rear mounting plates to each side of the Director, as shown in
Figure
4. For each plate, use three screws.
8
director 2/140 rack mount kit installation instructions