HP StorageWorks 7110 - Virtual Array Manual - Page 2

Browse online or download pdf Manual for Switch HP StorageWorks 7110 - Virtual Array. HP StorageWorks 7110 - Virtual Array 4 pages. Private loop (hubs/direct connect)
Also for HP StorageWorks 7110 - Virtual Array: Using Manual (34 pages), Upgrade Instructions (12 pages), Instructions (4 pages), Manual (4 pages), Installation Instructions (2 pages), Manual (2 pages), Manual (1 pages), Manual (1 pages)

Print Page

HP StorageWorks 7110 - Virtual Array Manual

cfg

cfg -L <LUN ID> -a <capacity> [{G|g}|{K|k}] –g <RG Id>

cfg -L <LUN ID> -d

To Create a LUN requires three

parameters, LUN ID, capacity and RD

Id.

-L <LUN ID>: specify LUN ID to be

created.

-a <capacity>: specify LUN capacity.

Capacity is default to MB.

If followed by 'K' or 'k', the capacity is in

kilobytes and must be a multiple of

512.

If followed by 'G' or 'g', the capacity is in

gigabytes.

-g <RG ID>: redundancy group id. For

VA 7100 set to 1, for VA 7400 set to 1

or 2.

For valid number of LUNs to create,

check dsp –s for CREATE LUN LIMIT.

-L followed by –d: deletes LUN, no

need to specify capacity, just LUN ID.