HP StorageWorks 8B - FC Entry Switch Installation Manual - Page 3

Browse online or download pdf Installation Manual for Switch HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 14 pages. Fabric os release notes version 3.0.1b
Also for HP StorageWorks 8B - FC Entry Switch: Update Manual (9 pages), Installation Instructions Manual (20 pages), User Manual (22 pages), Firmware Release Notes (14 pages), Release Note (26 pages), Manual (50 pages), User Manual (44 pages), User Manual (44 pages), User Manual (38 pages), User Manual (38 pages), User Manual (37 pages), User Manual (30 pages), Release Note (16 pages)

Print Page

Installing the Switch in a Rack Using the SAN Switch Universal

Rack Mount Kit

This section provides instructions for installing the SAN Switch 2/32, SAN

Switch 2/16, or SAN Switch 2/8 in an HP System/e rack, or in an HP 9000 Series

or comparable EIA rack using the SAN Switch Universal Rack Mount Kit, part

number 331148-B21.

Figure 1: SAN Switch 2/16 rack-mounted switch

Note:

The following items are required to install the switch in a rack:

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

The Universal Rack Mount Kit installation requires two technicians.

SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8

Power cables

#2 Phillips screwdriver

7/16-inch wrench or socket

The SAN Switch Universal Rack Mount Kit rails and rail mounting hardware

listed below:

(2) Rear mounting brackets

Addendum Pg