HP StorageWorks MSA 2/8 - SAN Switch Release Note - Page 4

Browse online or download pdf Release Note for Switch HP StorageWorks MSA 2/8 - SAN Switch. HP StorageWorks MSA 2/8 - SAN Switch 10 pages. Hp storageworks fabric os commands v3.1.x/4.1.x quick reference guide (aa-rte6b-te, june 2003)
Also for HP StorageWorks MSA 2/8 - SAN Switch: Update Manual (9 pages), Quick Reference Manual (8 pages)

Print Page
NOTE:
HP software release policy is to carry forward all fixes in patches to subsequent
maintenance and feature releases of Fabric OS.

Supported switches

Fabric OS v3.2.1 supports the following switches:
•
HP StorageWorks SAN Switch 2/8
•
HP StorageWorks MSA SAN switch 2/8
•
HP StorageWorks SAN Switch 2/16
Fabric OS 3.2.1 updates
Table 1
lists Fabric OS 3.2.1 fixes.
Table 1
Issues resolved in this 3.2.1 release
Issue prior to Fabric OS 3.2.1
Third party tape drives did not respond to
Login (L) bit, based on switch lock L port
configuration.
After executing switchdisable or enable
in a large, secure fabric, some SAN Switch
2/16 models experienced queue overflow
and rebooted.
No monitoring of basic monitor service
without an Advanced Performance
Monitoring (APM) license.
config upload failed on switches
supporting a large Zone database.
SAN Switch 2/16 models panicked when
connected to a third party switch during
Zoning updates in Interop mode.
SAN Switch 2/16 models used incorrect
buffer-tobuffer (BB) credits when switch BB
credit was set less than device BB credit.
4
Supported switches
Fix
Third party tape drives working with SAN Switch 2/16.
SAN Switch 2/16 in large, secure fabrics do not
experience queue overflow messages and switch reboot.
Basic monitoring allowed without an Advanced
Performance Monitoring (APM) license.
API_MAX_CONFIG size is increased.
SAN Switch 2/16 models operate normally during
Zoning updates in Interop mode.
Fabric OS 3.2.1 uses same BB credit limit as
defined in switch.