HP XP20000/XP24000 Configuration Manual - Page 21

Browse online or download pdf Configuration Manual for Switch HP XP20000/XP24000. HP XP20000/XP24000 46 pages. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Also for HP XP20000/XP24000: Release Note (13 pages), Integration Manual (29 pages), Release Note (4 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), Configuration Manual (46 pages), Reference Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages)

Print Page
HP XP20000/XP24000 Configuration Manual
9.
Select Create NetWare disk partition again, and press Enter.
10.
When the "Create NetWare Partition?" message appears, click Yes and press Enter to create
the specified disk partition on the selected device.
11.
Press Esc until you are returned to the Available Devices screen. Repeat steps 4 through 10 to
create the disk partition on each new OPEN-x and LUSE device.
12.
When you are finished creating disk partitions, return to the Available Disk Options screen, click
Return to previous menu and press Enter.
NetWare 6.0
1.
Start ConsoleOne on the Windows server.
2.
Select and right click the targeted server, and then click Properties.
3.
Select the Media tab, click Devices, and then initialize the new devices.
4.
Click the Partitions option on the Media tab, select the desired device, and then select New... to
open the Create a new partition screen.
5.
On the Create a new partition screen, select the desired device, select NSS in the Type box, and
click OK.
6.
Enter the size of the partition in bytes (B), kilobytes (KB), megabytes (MB), or gigabytes (GB) and
click OK.
7.
To reserve space for the Hot Fix error correction feature, select Hot Fix and enter the amount of
space or percentage you want to reserve.
Mirrored partitions must be compatible in data area size. This means the new partition must be
at least the same size or slightly larger than the other partitions in the group. The physical size
(combined data and Hot Fix size) of the partition must be at least 100 KB larger, but no more
than 120 MB larger than the data size of the existing partitions in the mirror group.
8.
To mirror the partition, select Mirror and select one of the following options:
• Create New Mirror. This option means you are making the partition capable of being part of
a mirror group. You do not actually create the group until you add another mirrored partition
to the partition you are creating.
• Existing Mirror Group. (If you select this option, also select the ID of the mirrored partition.)
This shows a list of existing mirror groups that are compatible in data area size. This option
lets you add this new partition to one of the mirror groups in the list.
9.
Select NSSPools on the Media tab, and select New... to open the Create a New Pool screen.
10.
On the Create a New Pool screen, enter the name for the new pool, and click Next.
11.
Select the disk to be included in the pool, and click Next.
12.
On the Create Pool – Attribute Information screen, check Activate on Creation to make the new
pool active, and then click Finish.
13.
Select a label for the partition (optional).
14.
Click OK.
NetWare 6.5
1.
Enter NSSMU at the server console
2.
In the main menu, select "Partitions."
XP Disk Array Configuration Guide for Novell Netware
21