HP XP20000/XP24000 Configuration Manual - Page 23

Browse online or download pdf Configuration Manual for Switch HP XP20000/XP24000. HP XP20000/XP24000 46 pages. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Also for HP XP20000/XP24000: Release Note (13 pages), Integration Manual (29 pages), Release Note (4 pages), Administrator's Manual (50 pages), Configuration Manual (42 pages), Configuration Manual (40 pages), Configuration Manual (40 pages), Configuration Manual (36 pages), Configuration Manual (36 pages), Configuration Manual (30 pages), Configuration Manual (36 pages), Release Note (5 pages), Configuration Manual (46 pages), Reference Manual (46 pages), Configuration Manual (40 pages), Configuration Manual (44 pages), Configuration Manual (38 pages), Configuration Manual (34 pages), Configuration Manual (30 pages), Configuration Manual (30 pages)

Print Page
HP XP20000/XP24000 Configuration Manual
4.
On the Create Logical Volume – Storage Information screen, select the desired pool/device,
enter the desired Volume Quota, and click Next.
5.
After you have created the pool, select Activate and Mount in the On Creation box, and then
click Finish.
NetWare 6.5
1.
Enter NSSMU at the server console
2.
In the main menu, select Pools.
3.
Press Insert and enter a name for the new pool.
4.
Select Activate and Mount in the On Creation box as desired.
5.
Specify the Virtual Server Name, IP Address, Advertising Protocols and, if necessary, the CIFS
Server Name.
6.
Select Create.

Mounting the new volumes

NetWare 5.x
1.
From the Available Disk Options screen, click NetWare Volume options to display the volume
list and volume options,and then click Mount/Dismount an existing volume and press Enter.
2.
On the Directory Services Login/Authentication screen, enter the NetWare administrator password,
then press Enter.
3.
An informational message displays the number of new volumes just added. Press Enter to continue.
4.
You are now prompted to select the desired mount action. Click either Mount all volumes or
Mount volumes selectively as desired.
The mount status for all volumes is now displayed.
5.
If you chose to mount volumes selectively, select the desired volume, press Enter to mount the
volume, and then confirm that the volume's status changed to MOUNTED. Repeat this step for
each new volume to confirm that all new volumes can be mounted successfully.
6.
When you have confirmed that all new volumes/devices were mounted successfully, you are
finished with disk array device configuration. Leave the new volumes mounted for now, so you
can verify that NetWare clients can access the new volumes.
NetWare 6.0
1.
Using ConsoleOne right click the targeted server, and click Properties.
2.
Click the Media tab, and click NSS Logical Volumes.
3.
Click New, enter a name for the volume, then click Next.
4.
In the Create Logical Volume - Storage Information window, select the desired pool/device, enter
the desired Volume Quota, then click Next.
5.
In the Create Logical Volume - Storage Information window check Activate and Mount in the "On
Creation" box, then click Finish.
6.
Confirm that the logical volume has been created.
XP Disk Array Configuration Guide for Novell Netware
23