HP Xw460c - ProLiant - Blade Workstation Installation Instructions Manual - Page 9

Browse online or download pdf Installation Instructions Manual for Switch HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 10 pages. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Also for HP Xw460c - ProLiant - Blade Workstation: Implementation Manual (35 pages), Error Prevention Manual (12 pages), Technical White Paper (12 pages), Firmware Update (9 pages), Installation Manual (2 pages), Frequently Asked Questions Manual (14 pages), Setup Poster (9 pages), Installation Manual (33 pages), Management Manual (28 pages), Hardware Manual (23 pages), Overview (35 pages), User Manual (33 pages), Optimization Manual (13 pages), Limited Warranty (10 pages), Installation Instructions Manual (8 pages), Installation Instructions (4 pages), Installation Instructions (2 pages)

Print Page
HP Xw460c - ProLiant - Blade Workstation Installation Instructions Manual
Step 5—Install the two low-profile Quadro FX 560M graphics boards
In this step, the two low-profile Quadro FX 560M graphics boards are installed. These boards are identical—either
board can be inserted in either mezzanine connector. Insert the first board in the Mezzanine 1 connector using
the three captive retaining screws as shown below. Ensure that the connector on the graphics board is firmly
seated in the Mezzanine 1 connector.
- 9 -