HP Xw460c - ProLiant - Blade Workstation Installation Instructions Manual - Page 7

Browse online or download pdf Installation Instructions Manual for Switch HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 10 pages. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Also for HP Xw460c - ProLiant - Blade Workstation: Implementation Manual (35 pages), Error Prevention Manual (12 pages), Technical White Paper (12 pages), Firmware Update (9 pages), Installation Manual (2 pages), Frequently Asked Questions Manual (14 pages), Setup Poster (9 pages), Installation Manual (33 pages), Management Manual (28 pages), Hardware Manual (23 pages), Overview (35 pages), User Manual (33 pages), Optimization Manual (13 pages), Limited Warranty (10 pages), Installation Instructions Manual (8 pages), Installation Instructions (4 pages), Installation Instructions (2 pages)

Print Page

If a high-profile Quadro FX 560M is installed, it will appear similar to the following picture—continue with Step 4B

to remove this board.

Steps 4A and 4B—Remove the current graphics board

Steps 4A and 4B both require the removal of the current graphics board in order to access the connector beneath

the board. In Step 4A, the current graphics board (a low-profile Quadro FX 560M) is retained for re-use. In Step

4B, the current graphics board (either a high-profile Quadro FX 560M, a Quadro FX 540M, or a Quadro FX

1600M) is not re-used. Before presenting Steps 4A and 4B, the common board removal tasks are described.

Remove the blade workstation if it is still mounted in the rack. Removal of the blade workstation from the rack and

removal of the blade workstation access panel is described in the document HP ProLiant BL460c Server Blade

Maintenance and Service Guide, available at http://www.hp.com/support/xw460c_manuals. Follow the

instructions in the Maintenance and Service Guide to:

Power down the blade workstation.

Remove the blade workstation from the rack.

Remove the blade workstation access panel.

- 7 -