HP Xw460c - ProLiant - Blade Workstation Handleiding voor installatie-instructies - Pagina 7

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 10 pagina's. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ook voor HP Xw460c - ProLiant - Blade Workstation: Implementatiehandleiding (35 pagina's), Handleiding voor foutpreventie (12 pagina's), Technisch witboek (12 pagina's), Firmware bijwerken (9 pagina's), Installatiehandleiding (2 pagina's), Handleiding met veelgestelde vragen (14 pagina's), Poster opstellen (9 pagina's), Installatiehandleiding (33 pagina's), Management Handleiding (28 pagina's), Hardware Handleiding (23 pagina's), Overzicht (35 pagina's), Gebruikershandleiding (33 pagina's), Handleiding voor optimalisatie (13 pagina's), Beperkte garantie (10 pagina's), Handleiding voor installatie-instructies (8 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (2 pagina's)

Pagina afdrukken
HP Xw460c - ProLiant - Blade Workstation Handleiding voor installatie-instructies
If a high-profile Quadro FX 560M is installed, it will appear similar to the following picture—continue with Step 4B
to remove this board.
Steps 4A and 4B—Remove the current graphics board
Steps 4A and 4B both require the removal of the current graphics board in order to access the connector beneath
the board. In Step 4A, the current graphics board (a low-profile Quadro FX 560M) is retained for re-use. In Step
4B, the current graphics board (either a high-profile Quadro FX 560M, a Quadro FX 540M, or a Quadro FX
1600M) is not re-used. Before presenting Steps 4A and 4B, the common board removal tasks are described.
Remove the blade workstation if it is still mounted in the rack. Removal of the blade workstation from the rack and
removal of the blade workstation access panel is described in the document HP ProLiant BL460c Server Blade
Maintenance and Service Guide, available at http://www.hp.com/support/xw460c_manuals. Follow the
instructions in the Maintenance and Service Guide to:
1.
Power down the blade workstation.
2.
Remove the blade workstation from the rack.
3.
Remove the blade workstation access panel.
- 7 -