Diamond Products CC190PRO Operator's Manual - Page 5
Browse online or download pdf Operator's Manual for Saw Diamond Products CC190PRO. Diamond Products CC190PRO 16 pages. Concrete saw
Print Page
General Safety
Read and understand all of the safety,
operations, and maintenance instructions
provided in this manual prior to operating or
servicing the saw.
Keep saw components clean and free of
slurry, concrete dust, and debris.
Raise the saw to a proper
height for access when
working underneath the
saw. Use chocks to block
the wheels, and fit blocks or jacks under the
frame edges at the front and back of the
frame for additional support.
When using a jack to raise the saw, place
the jack against a solid, flat area under the
frame base to properly support the saw
while lifting.
Repair the saw immediately when a
problem arises.
Replace saw decals if unreadable.
Dispose of all hazardous waste materials
according to city, state, and federal
regulations.
Always have a phone nearby, and locate
the nearest fire extinguisher and first aid kit
prior to operating the saw.
Operate the saw wearing flame resistant
clothing.
Always wear safety glasses when removing
retaining rings.
Persons under the statutory age limit should
not operate the saw.
Keep all body parts away from rotating
machinery.
Replace all guards and access panels
(unless stated otherwise) prior to operating
the saw.
DO NOT assume the saw will remain still
when in Neutral or when parking/stopping
the saw on a slope. Chock the tires to help
prevent unnecessary movement.
All non-routine maintenance tasks should
be performed by an authorized service
center.
DO NOT:
Drop equipment, supplies, tools, etc., when
handling to help prevent injuries.
Operate the saw around combustible materials
or fumes to prevent fires/explosions.
Lift and carry equipment, supplies, tools, etc.,
that are too heavy and/or cannot be lifted
easily.
Operate the saw without using the appropriate
safety equipment required for the work task.
Operate or service the saw with clothing, hair,
or accessories that can snag in the machinery,
which could lead to serious injuries or death!
Operate the saw with anyone near the work
area.
Operate the saw until unnecessary materials
have been removed from the work area.
Operate the saw using attachments not
associated with or recommended for the saw.
Operate the saw around combustible materials
or fumes to prevent fires/explosions.
Operate the saw with anyone near the work
area or within the direct line of the blade.
Operate the saw with loose nuts, screws, and
bolts.
Operate the saw when ill or fatigued.
Operate the saw under the influence of drugs
and/or alcohol.
Operate the saw on steep slopes.
Cut concrete with guards and access panels
removed.
Grease the saw with the engine running (unless
stated otherwise).
Touch hot components when operating the
saw.
Leave the saw unattended until the engine is off
and the blade has stopped spinning.
Place the saw into storage until it has cooled
down.
Service the saw until it has cooled down.
Service the saw with the engine running (unless
stated otherwise).
5