dibea R701 User Manual - Page 7

Browse online or download pdf User Manual for Vacuum Cleaner dibea R701. dibea R701 12 pages. Robotic vacuum cleaner

Print Page

Product Operation

1. Battery charging

A.Place charging home base

Put charging home base against the wall

and remove obstacles about 1 meter at two

sides and about 2 meters forward like right picture

B.Press power On/Off button to open the robot.

C.Two choices for charging

a.directly plug adapter into the robot and other end to power socket as fig a.

b.press

button on the main body or remote control to make robot to home

base for charging as fig b

Note:

a. During charging, LED panel will show '11:11'.

b. After finishing charging, LED panel will show "FULL"

c. Low power in standby mode, robot will speack"please charge", LED panel will show

d. Low power in working mode, robot will return to charging station automatically, and

LED panel will show

Ways to effectively extend battery life:

a. Before first use, charge the robot for 12 hours.

b. Once the battery uses up, recharge it as soon as possible.

c. The robot will automatically return to charging home base when cleaning is done

or power is low.

d. If the robot is not used for a long time, take out the battery and put it in a safe place.

e. If robot is not used more than 3 months, please charge it for 12 hours.

2. Starting up/ Standby/ Sleeping/ Shut down

A.Starting up

a. Make sure power button is in "on" statue.

b. Press

button on main body or remote control to start cleaning.

Note:

If the rotot is in sleeping mode, press

it to the standby mode first and press it again to start cleaning.

on main body or remote control to change

Product Operation

B. Standby

Standby means the robot is connected to power supply and wait for your further operation,

change to standby via followed ways:

a. when the robot is working, press

b. press "On/Off" button on the remote control

C. Sleeping

When robot is in sleeping mode, press

it up. To conserve battery life to a maximum degree, switch to sleeping mode via followed

ways:

a. when in standby mode, long press

b. when in standby mode, no operation more than 60 seconds, it will switch to sleeping mode

automatically.

D. Shut down

Directly turn off power.

3. Scheduling

You can schedule the robot to make it clean automatically at a certain time every day.

The robot can only be set when it 's in Standby or Charging mode. If the robot is in sleep mode,

press

on main body or ON/OFF button on remote control to wake up the robot. If the robot is

in cleaning mode, stop it before scheduling.

1. Scheduling by the LED panel on robot

A. Setting robot clock

Press

to check the time and the panel shows the current time. The

Press

to set the hour. The left two numbers will flash. Press

Press

to increase the hour. Press

Press

to decrease the minute, press to increase the minute. Press

The day indicator light will flash. Press

Press

to save the setting and back to check the time.

( During scheduling, press

back to standby mode, settings won't be saved.)

B. Check the scheduling

In standby mode, short press

to check the schedule. The

the display panel. Press

to set the next day. Press

C. Setting scheduling time

To set scheduling time,follow the same steps as setting robot clock.

D. Cancel scheduling

In modifying schedule, set the scheduling time as 00:00 and confirm, then the scheduling will be cancelled.

E. One-click scheduling/ cancellation

In standby mode, long press

the for 2 seconds to set the current time as daily scheduled working

time.

In checking schedule mode, long press

switch to standby

on the main body or remote control to wake

button 3 seconds switch to sleeping mode.

will flash.

to decrease the hour.

to set the minute, the right two numbers will flash.

to set the day.

to decrease the day. Press

to increase the day.

will flash. The day will be shown on

to set the previous day.

for 2 seconds to cancel all the scheduling.