DiBiQuadro MercuryRec User Manual - Page 11

Browse online or download pdf User Manual for Musical Instrument Amplifier DiBiQuadro MercuryRec. DiBiQuadro MercuryRec 19 pages.
Also for DiBiQuadro MercuryRec: User Manual (14 pages)

Print Page

opening

after

passing

threshold, to avoid gain flickering.

RealTime and OffLine tabs. These tabs

allow the user to specify different

configurations

for

depending on the current processing

mode.

RealTime tab. This mode is applied by

your sequencer when you are using a

plugin for monitoring, or when you are

playbacking tracks. We suggest to

keep the UpSamplingFactor at 1x in

case of monitoring, 4x in case of

playback @ 44100/48000Hz, 2x in case

of playback @ 88200/96000Hz.

OffLine tab. This mode is set by your

sequencer when you are bouncing a

track or the complete mix. If the

elaboration time is not a constraint for

you and you need to render hi-gain

guitars with the Overdrive Channel, we

suggest to set the UpSamplingFactor to

at least 128x @ 44100/48000Hz, 64x @

88200/96000Hz in order to minimize the

aliasing artifacts and get super high-

quality distortion. Try also to set a very

high PreRenderFactor (32x) to stabilize

the model in advance. For very long

renders, we strongly suggest to use

MercuryRec Renderer in command line

mode.

ReSamplerBufferSize.

ReSampler Buffer Size in number of

samples.

UpSamplingFactor.

UpSampling Factor applied to the base

below

the

ReSampler

This

the

This

the

input SampleRate. Use it to increase the

quality or your playbacks and renders,

but

take

into

account

UpSampling

factors

more samples to be processed, and

consequently longer processing times.

UpFilterTransBand. This

UpSampling Filter Transition Band, in

percent of the spectral space of the

input signal between filter's -3 dB point

and the Nyquist frequency.

UpFilterType. It defines the UpSampling

filter's phase response: Minimum Phase

or Linear Phase.

DownFilterTransBand.

DownSampling Filter Transition Band, in

percent of the spectral space of the

output signal between filter's -3 dB

point and the Nyquist frequency. If you

are working at sample rates higher

than 44100/48000Hz, we suggest to

increase it to 43% to have a smoother

low pass filter without impacting the

audible frequencies.

DownFilterType.

DownSampling filter's phase response:

Minimum Phase or Linear Phase.

PreRenderFactor. Together with input

SampleRate

and

PreRenderFactor affects how many

samples will be pre-rendered by the

model before the real processing. We

suggest to set it to the highest value –

32x – in Offline mode.

DONE. It closes the SET window.

that

high

correspond

the

This

the

defines

the

UpSamplingFactor,