DiBiQuadro MercuryRec Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Amplificador de instrumentos musicais DiBiQuadro MercuryRec. DiBiQuadro MercuryRec 19 páginas.
Também para DiBiQuadro MercuryRec: Manual do utilizador (14 páginas)
Imprimir página
opening
after
passing
threshold, to avoid gain flickering.
RealTime and OffLine tabs. These tabs
allow the user to specify different
configurations
for
depending on the current processing
mode.
RealTime tab. This mode is applied by
your sequencer when you are using a
plugin for monitoring, or when you are
playbacking tracks. We suggest to
keep the UpSamplingFactor at 1x in
case of monitoring, 4x in case of
playback @ 44100/48000Hz, 2x in case
of playback @ 88200/96000Hz.
OffLine tab. This mode is set by your
sequencer when you are bouncing a
track or the complete mix. If the
elaboration time is not a constraint for
you and you need to render hi-gain
guitars with the Overdrive Channel, we
suggest to set the UpSamplingFactor to
at least 128x @ 44100/48000Hz, 64x @
88200/96000Hz in order to minimize the
aliasing artifacts and get super high-
quality distortion. Try also to set a very
high PreRenderFactor (32x) to stabilize
the model in advance. For very long
renders, we strongly suggest to use
MercuryRec Renderer in command line
mode.
ReSamplerBufferSize.
ReSampler Buffer Size in number of
samples.
UpSamplingFactor.
UpSampling Factor applied to the base
below
the
the
ReSampler
This
is
the
This
is
the
11
input SampleRate. Use it to increase the
quality or your playbacks and renders,
but
take
into
account
UpSampling
factors
more samples to be processed, and
consequently longer processing times.
UpFilterTransBand. This
UpSampling Filter Transition Band, in
percent of the spectral space of the
input signal between filter's -3 dB point
and the Nyquist frequency.
UpFilterType. It defines the UpSampling
filter's phase response: Minimum Phase
or Linear Phase.
DownFilterTransBand.
DownSampling Filter Transition Band, in
percent of the spectral space of the
output signal between filter's -3 dB
point and the Nyquist frequency. If you
are working at sample rates higher
than 44100/48000Hz, we suggest to
increase it to 43% to have a smoother
low pass filter without impacting the
audible frequencies.
DownFilterType.
It
DownSampling filter's phase response:
Minimum Phase or Linear Phase.
PreRenderFactor. Together with input
SampleRate
and
PreRenderFactor affects how many
samples will be pre-rendered by the
model before the real processing. We
suggest to set it to the highest value –
32x – in Offline mode.
DONE. It closes the SET window.
that
high
correspond
to
is
the
This
is
the
defines
the
UpSamplingFactor,