Dictator DICTAMAT 50 WS-MFL Technical Manual - Page 6

Browse online or download pdf Technical Manual for Door Opening System Dictator DICTAMAT 50 WS-MFL. Dictator DICTAMAT 50 WS-MFL 17 pages.

Technical Manual
DICTAMAT 50 WS-MFL
Page D50WS-MFLHB.06
C) Installation of the DICTAMAT 50 WS-MFL - cont.
2c) Fixing the radial damper in the freewheel carrier
Now you use the four included plastic screws (Torx T20) to fix the radial
damper in the freewheel carrier.
Max. tightening torque of the screws: 2 Nm
ATTENTION: The adjusting screw has to be on the same side as the
oblong hole in the carrier bottom.
2d) Correct positioning of the attachment for the wire rope
In the factory the attachment for the wire rope is fixed in such a way on
the radial damper LD 50 that the wire rope can be guided as shown in
ill. 12 and the damping will be effective anticlockwise.
However, on rare occasions it may be necessary to dismount the attachment
for changing the damping direction and then to fix it again.
Supporting rope
© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 201906
Adjusting screw
Oblong hole
Fixing bores for the
radial damper
. 11
Ill
Wire rope
. 12
Ill