Dictator DICTAMAT 50 WS-MFL Техническое руководство - Страница 6

Просмотреть онлайн или скачать pdf Техническое руководство для Система открывания дверей Dictator DICTAMAT 50 WS-MFL. Dictator DICTAMAT 50 WS-MFL 17 страниц.

Печатать страницу

Technical Manual

DICTAMAT 50 WS-MFL

Page D50WS-MFLHB.06

C) Installation of the DICTAMAT 50 WS-MFL - cont.

2c) Fixing the radial damper in the freewheel carrier

Now you use the four included plastic screws (Torx T20) to fix the radial

damper in the freewheel carrier.

Max. tightening torque of the screws: 2 Nm

ATTENTION: The adjusting screw has to be on the same side as the

oblong hole in the carrier bottom.

2d) Correct positioning of the attachment for the wire rope

In the factory the attachment for the wire rope is fixed in such a way on

the radial damper LD 50 that the wire rope can be guided as shown in

ill. 12 and the damping will be effective anticlockwise.

However, on rare occasions it may be necessary to dismount the attachment

for changing the damping direction and then to fix it again.

Supporting rope

Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 201906

Adjusting screw

Oblong hole

Fixing bores for the

radial damper

. 11

Ill

Wire rope

. 12

Ill