Alpha Moisture Systems DS5000 Instruction Manual - Page 14

Browse online or download pdf Instruction Manual for Monitor Alpha Moisture Systems DS5000. Alpha Moisture Systems DS5000 19 pages. Dewpoint monitor

Print Page

Operation – While 'oFSt' is displayed press the ' ↵' key to enter the subroutine. If the

DS5000 is set-up to require a security code, the LCD now displays 'codE' for 2 seconds

followed by '0000'. Use the ' 5', ' 6', ' ', & ' ↵' keys to enter the current oFSt security

code. If no code is required or the correct code has been entered the LCD changes to 'crnt'

(offset position) followed 2 seconds later by '0000'. Use the ' 5', ' 6', ' ', & ' ↵' keys to

enter the value at which the offset is to be implemented. The LCD then changes to 'nu'

(offset value) followed by '0000'. Use the ' 5', ' 6', ' ', & ' ↵' keys to enter the new

value for the offset. The LCD changes to the word 'donE' and then exits the System Menu 5

seconds latter.

Note: to remove an offset, simply re-input the values in the reverse order.

9.9 CodE

Description – The CodE menu option allows the user to alter the security passwords used to

protect the SYS, ACAL and oFSt routines.

Operation – While 'CodE' is displayed press the ' ↵' key to enter the subroutine. The LCD

now displays 'SYS'. Use the ' ' key to select the security password to be changed, and

then press the '↵' key.

Note - If the '

the base level.

The LCD displays 'OLd' for 2 seconds before displaying '0000'. The user is then required

to enter the current security password. Use the '5', ' 6', ' ', & ' ↵' keys to enter the

password. Pressing the '↵' key triggers the DS5000 to compare the entered code with the

stored code. If the two codes match, the LCD displays 'nu' for 2 seconds before displaying

'0000'. Use the ' 5', ' 6', ' ', & ' ↵' keys to enter the new security password. The LCD

then displays the word 'donE' to indicate that the new security password has been stored in

memory. The screen then reverts to 'CodE' 5 seconds latter.

Note: If the entered 'old' code is not the same as the stored code the user is sent back to the ' CodE'

screen.

Description – The InFo menu option is as an aid in fault finding as well as a means of

displaying several key pieces of information with regard to the transmitter and DS5000.

Operation – While 'InFo' is displayed press the ' ↵' key to enter the subroutine. The LCD

will now display the software version number e.g. 'v0.18'. Each press of the ' ' key will

display a new piece of information. Pressing the '5' key at any time will return to the base

level. The information is displayed in the following table: -

1188 Instruction Man DS5000.doc

' key is pressed instead of the ' ↵' key the DS5000 will return to the ' CodE' screen on

Page 11 of 16