Axis 1650 Setup Instructions - Page 12

Browse online or download pdf Setup Instructions for Print Server Axis 1650. Axis 1650 14 pages. Axis 1650 print server: installation guide
Also for Axis 1650: Setup Instructions (16 pages)

Print Page
Axis 1650 Setup Instructions
Page 14
4. Right-click the device you would like to use (example: WIA
Canon MF3110) and select Properties.
Events
5.
Select
and select the event
Button.
Under Actions, select the option
6.
MF ToolBox
select
7.
Click [OK].
Now you have prepared your computer for scanning via AXIS 1650.
Note: These steps are just needed prior to the first scanning from the computer.
Starting a Scan from the Canon Device
When you have established a connection between your computer and the scanner with AXIS
ScanClient, place the object to be scanned on the scanner flatbed.
1. If the Canon device is in Energy Save mode, press its [Energy Saver key].
2. Press [Scan] on the Canon device.
3. Press [Start] on the Canon device.
4. The scanning will start.
5. When ready, remove the scanned object from the flatbed and walk back to your computer.
6. Close the receiving program on your computer and end the scanning session (see below).
Note: When waking up from Power Off or Energy Save mode the Canon device needs some
time (from 30 seconds to a few minutes) to adjust the light and the scanner to produce
optimum scans. Press [Start] repeatedly until scanning starts.
Canon MF3110 Scan
Start this program
in the list.
AXIS 1650 Set-up Instructions
and