Axis 1650 Инструкции по настройке - Страница 12

Просмотреть онлайн или скачать pdf Инструкции по настройке для Сервер печати Axis 1650. Axis 1650 14 страниц. Axis 1650 print server: installation guide
Также для Axis 1650: Инструкции по настройке (16 страниц)

Печатать страницу

Page 14

4. Right-click the device you would like to use (example: WIA

Canon MF3110) and select Properties.

Events

Select

and select the event

Button.

Under Actions, select the option

MF ToolBox

select

Click [OK].

Now you have prepared your computer for scanning via AXIS 1650.

Note: These steps are just needed prior to the first scanning from the computer.

Starting a Scan from the Canon Device

When you have established a connection between your computer and the scanner with AXIS

ScanClient, place the object to be scanned on the scanner flatbed.

1. If the Canon device is in Energy Save mode, press its [Energy Saver key].

2. Press [Scan] on the Canon device.

3. Press [Start] on the Canon device.

4. The scanning will start.

5. When ready, remove the scanned object from the flatbed and walk back to your computer.

6. Close the receiving program on your computer and end the scanning session (see below).

Note: When waking up from Power Off or Energy Save mode the Canon device needs some

time (from 30 seconds to a few minutes) to adjust the light and the scanner to produce

optimum scans. Press [Start] repeatedly until scanning starts.

Canon MF3110 Scan

Start this program

in the list.

AXIS 1650 Set-up Instructions

and