Axis 1650 Инструкции по настройке - Страница 11
Просмотреть онлайн или скачать pdf Инструкции по настройке для Сервер печати Axis 1650. Axis 1650 14 страниц. Axis 1650 print server: installation guide
Также для Axis 1650: Инструкции по настройке (16 страниц)
Печатать страницу
AXIS 1650 Set-up Instructions
Connect to Scanners
These sections describe how to scan via an AXIS 1650 using AXIS ScanClient. For general
information on scanning, see your Canon device manual. The examples in this section show
Windows XP and a Canon MF3110 with MF Toolbox.
AXIS ScanClient will open a channel between your computer and the scanner. The channel will
be open for a configurable amount of time to give you time to walk to the scanner and place
the object to be scanned on the flatbed. During this time you have exclusive rights to the
scanner.
Connect to the Scanner
AXIS ScanClient
1. Start
scanning devices. Mark the one you would like to use by clicking on it in the list (you can
also select a scanner by entering its IP address). Click [Connect].
2. If the scanner is busy AXIS ScanClient will show
who is using it, otherwise you will be connected,
as indicated on the message line.
3. Click [Help] to get information on how to connect
and disconnect.
Prepare your Computer (first time only)
1. Connect to the scanner with
Start | Settings | Control
2. Go to
Scanners and
3. Click on
(Start | AXIS ScanClient). The client will search the network for
AXIS
ScanClient.
Panel.
Cameras.
Page 13