Axis 1650 설정 지침 - 페이지 11

{카테고리_이름} Axis 1650에 대한 설정 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Axis 1650 14 페이지. Axis 1650 print server: installation guide
Axis 1650에 대해서도 마찬가지입니다: 설정 지침 (16 페이지)

페이지 인쇄

AXIS 1650 Set-up Instructions

Connect to Scanners

These sections describe how to scan via an AXIS 1650 using AXIS ScanClient. For general

information on scanning, see your Canon device manual. The examples in this section show

Windows XP and a Canon MF3110 with MF Toolbox.

AXIS ScanClient will open a channel between your computer and the scanner. The channel will

be open for a configurable amount of time to give you time to walk to the scanner and place

the object to be scanned on the flatbed. During this time you have exclusive rights to the

scanner.

Connect to the Scanner

AXIS ScanClient

1. Start

scanning devices. Mark the one you would like to use by clicking on it in the list (you can

also select a scanner by entering its IP address). Click [Connect].

2. If the scanner is busy AXIS ScanClient will show

who is using it, otherwise you will be connected,

as indicated on the message line.

3. Click [Help] to get information on how to connect

and disconnect.

Prepare your Computer (first time only)

1. Connect to the scanner with

Start | Settings | Control

2. Go to

Scanners and

3. Click on

(Start | AXIS ScanClient). The client will search the network for

AXIS

ScanClient.

Panel.

Cameras.

Page 13