Axis 1650 Instrucciones de instalación - Página 11
Navegue en línea o descargue pdf Instrucciones de instalación para Servidor de impresión Axis 1650. Axis 1650 14 páginas. Axis 1650 print server: installation guide
También para Axis 1650: Instrucciones de instalación (16 páginas)
Imprimir página
AXIS 1650 Set-up Instructions
Connect to Scanners
These sections describe how to scan via an AXIS 1650 using AXIS ScanClient. For general
information on scanning, see your Canon device manual. The examples in this section show
Windows XP and a Canon MF3110 with MF Toolbox.
AXIS ScanClient will open a channel between your computer and the scanner. The channel will
be open for a configurable amount of time to give you time to walk to the scanner and place
the object to be scanned on the flatbed. During this time you have exclusive rights to the
scanner.
Connect to the Scanner
AXIS ScanClient
1. Start
scanning devices. Mark the one you would like to use by clicking on it in the list (you can
also select a scanner by entering its IP address). Click [Connect].
2. If the scanner is busy AXIS ScanClient will show
who is using it, otherwise you will be connected,
as indicated on the message line.
3. Click [Help] to get information on how to connect
and disconnect.
Prepare your Computer (first time only)
1. Connect to the scanner with
Start | Settings | Control
2. Go to
Scanners and
3. Click on
(Start | AXIS ScanClient). The client will search the network for
AXIS
ScanClient.
Panel.
Cameras.
Page 13