Axis P7216 Installation Manual - Page 10
Browse online or download pdf Installation Manual for Media Converter Axis P7216. Axis P7216 17 pages. Video encoder
Print Page
Power connector - 2-pin terminal block for power input. Use a limited power source (LPS) with
either a rated output power limited to £100 W or a rated output current limited to £5 A.
I/O terminal connector - Use in applications for e.g. motion detection, event triggering, time
lapse recording and alarm notifications. In addition to an auxiliary power and a GND pin, the I/O
terminal connector provides the interface to:
Digital output – For connecting external devices such as relays and LEDs.
•
Connected devices can be activated by the VAPIX® Application Programming
Interface, output buttons on the Live View page or by an Action Rule. The
output will show as active (shown under System Options > Ports & Devices) if
the alarm device is activated.
•
Digital input – An alarm input for connecting devices that can toggle between
an open and closed circuit, for example: PIRs, door/window contacts, glass
break detectors, etc. When a signal is received the state changes and the input
becomes active (shown under System Options > Ports & Devices).
RS-485/RS-422 connector - Two 2-pin terminal blocks for RS-485/RS-422 serial interface used to
control auxiliary equipment, e.g. PTZ devices.
Specifications
Operating Conditions
The casing of AXIS P7216 is not approved for outdoor use. The product may only be installed in
indoor environments.
Product
AXIS P7216
Power Consumption
Product
AXIS P7216
Temperature
0 °C to 50 °C
(32 °F to 122 °F)
Power supply
AXIS PS-P power supply
10
AXIS P7216 Video Encoder
Humidity
20-80% RH (non-condensing)