Olympus IR-500 Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Digital Camera Olympus IR-500. Olympus IR-500 2 pages. Ir-500 dock and done 2.0 supplement (english)
Also for Olympus IR-500: Reference Manual (30 pages)
d Press d to move to the year, month or date fi eld, then press
Setting the date and time
a/c to select the desired number.
Press d to move to the next fi eld.
The date and time are not preset. If you set the date and time, it will be
stored with shot images and available for printing images.
Tips
• The fi rst two digits of the year are unchangeable.
Tip
• The camera displays the time in 24-hour format (ex; 2 p.m. is displayed as
If the date and time are not set, "Y/M/D" appears every time you turn on the camera.
"14:00").
a Turn the mode dial to
e Press 9 to confi rm the date and time settings.
q.
The clock starts operating.
Mode dial
The setup menu appears.
QUICK
VIEW
Note
abcd buttons
OK
The date and time settings will be canceled if the camera is left with the battery
OPEN
OPEN
9 button
removed for more than one day (under the standard Olympus testing conditions). If this
occurs, set the date and time again. The date and time settings will be canceled earlier
if the battery has been loaded for a short period of time.
b Press a/c to select "W," then press d
FILE NAME
RESET
to enter the date and time settings.
PIXEL MAPPING
, 04.01.01
00:00
VOLUME
c While "o" is selected, press a/c to
select the date format.
2004 . 01 . 01
Y
M
D
00 : 00
SELECT
SET
GO
Selecting the video signal type (VIDEO OUT)
Taking/Viewing/Erasing pictures
Select NTSC or PAL according to your TV video signal type. When you
Easy shooting with P-AUTO (Program Auto) mode
use the camera with a TV overseas, set the correct video signal type in
accordance with the local system before connecting to the TV. If an incorrect
You can easily take high-quality pictures with P-AUTO (Program Auto)
video signal type is set, the output images will not appear properly.
mode. In P-AUTO mode, the camera settings are automatically adjusted
according to the shooting situation to create the best results.
Tip
a Turn the mode dial to
Check the video signal type before connecting to your TV.
j.
NTSC: North America, Japan, Taiwan, Korea
PAL: European countries, China
a Turn the mode dial to
q.
Mode dial
The setup menu appears.
QUICK
VIEW
b Position the AF target mark on the subject.
abcd buttons
OK
Turn the zoom lever to the T (U) or W (G) side to frame the subject.
OPEN
OPEN
9 button
b Press a/c to select "VIDEO OUT."
VIDEO OUT
NTSC
Press d to enter the video signal type setting.
MODE RESET
PAL
Wide angle
Telephoto
(W/G)
(T/U)
Shooting mode
c Press a/c to select "NTSC" or "PAL."
d Press 9.
4M
4M
The video signal type is set, and the screen returns to the setup menu.
c Press and hold the shutter button gently (half-press).
Viewing pictures
The green indicator lights up when the focus and exposure are locked.
Press h after shooting to see the
If the subject is not in focus, the green indicator blinks. Recompose the
picture, and hold down the shutter button until the green indicator
last shot image. To return to the
lights up.
shooting mode, press h again.
Green indicator
100 00-0009
Half-press
Zoom lever
Shutter button
d Press the shutter button all the way (full-press).
Mode dial
VIEW
QUICK
The picture is taken and the card access lamp blinks. The shot image is
Card access lamp
stored onto the card.
OK
OPEN
OPEN
Erasing images
You can erase unwanted images on the card.
Full-press
a Display the image to be
QUICK
VIEW
erased.
Card access lamp
b Press S.
Note
The "ERASE" screen appears.
Do not open the battery/card cover while the card access lamp is blinking. The
picture being written may not be stored or the stored image data may be damaged.
c Press a/c to select "YES."
d Press 9.
The selected image is erased.
AF target mark
Note
Erased images cannot be restored.
Number of shots remaining
Record mode
Using images with your computer
With the supplied OLYMPUS Master software installed, you can transfer,
manage and edit camera images with your computer.
QUICK
VIEW
h button
Connecting the camera to a computer
0009
4M
4M
OK
SIZE:2288 1712
SIZE:2288
1712
OPEN
+2.0
+2.0
OPEN
Connect the camera to your computer, and you can transfer images on the
Displays the previous image.
card to your computer.
'04.12.03.14:03
'04.
12.03.14:03
9
a Install OLYMPUS Master.
OK
Displays the next image.
A Insert the supplied software CD-ROM into the CD-ROM drive of
your computer. The setup screen appears.
B Click [OLYMPUS Master].
C Click [Next], and operate according to the window messages.
D When the installation is complete, remove the CD-ROM from the
CD-ROM drive, and restart the computer.
abcd
b Insert the supplied USB cable into the USB port on your
QUICK
VIEW
buttons
computer.
9 button
OK
OPEN
OPEN
S button
USB mark
USB cable
USB port
Note
It is recommended to use the AC adapter as a power source when using the camera
with a computer.
c Insert the other end of the USB cable into
the USB port on the cradle.
A/V OUT
(MONO)
-
+
DC IN 5V
USB
d Set the camera on the cradle
Select this mark.
with the multi-swing display
opened.
e Select "PC" in the "PC/PRINTER" screen,
PC / PRINTER
PC
then press 9.
PRINT
SEL.PRINT
EXIT
SELECT
GO
f The computer recognizes the camera as a new device.
Windows 98SE/Me/2000: The camera is recognized as a removable
disk.
Windows XP: A window is displayed, prompting you to select the
operation for image fi les. Click [CANCEL].
Mac OS X: The iPhoto application is activated when the camera is
connected for the fi rst time. Terminate it.
Note
When the camera is connected to a computer, it cannot be used as a camera.
g Start OLYMPUS Master.
Double click the [OLYMPUS Master] icon to display the main menu
window.
For details on functions and operations, refer to the instruction manual
for OLYMPUS Master.