Olympus IR-500 Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Câmara digital Olympus IR-500. Olympus IR-500 2 páginas. Ir-500 dock and done 2.0 supplement (english)
Também para Olympus IR-500: Manual de referência (30 páginas)

Imprimir página

d Press d to move to the year, month or date ﬁ eld, then press

Setting the date and time

a/c to select the desired number.

Press d to move to the next ﬁ eld.

The date and time are not preset. If you set the date and time, it will be

stored with shot images and available for printing images.

Tips

• The ﬁ rst two digits of the year are unchangeable.

Tip

• The camera displays the time in 24-hour format (ex; 2 p.m. is displayed as

If the date and time are not set, "Y/M/D" appears every time you turn on the camera.

"14:00").

a Turn the mode dial to

e Press 9 to conﬁ rm the date and time settings.

The clock starts operating.

Mode dial

The setup menu appears.

QUICK

VIEW

Note

abcd buttons

The date and time settings will be canceled if the camera is left with the battery

OPEN

9 button

removed for more than one day (under the standard Olympus testing conditions). If this

occurs, set the date and time again. The date and time settings will be canceled earlier

if the battery has been loaded for a short period of time.

b Press a/c to select "W," then press d

FILE NAME

RESET

to enter the date and time settings.

PIXEL MAPPING

, 04.01.01

00:00

VOLUME

c While "o" is selected, press a/c to

select the date format.

2004 . 01 . 01

00 : 00

SELECT

SET

Selecting the video signal type (VIDEO OUT)

Taking/Viewing/Erasing pictures

Select NTSC or PAL according to your TV video signal type. When you

Easy shooting with P-AUTO (Program Auto) mode

use the camera with a TV overseas, set the correct video signal type in

accordance with the local system before connecting to the TV. If an incorrect

You can easily take high-quality pictures with P-AUTO (Program Auto)

video signal type is set, the output images will not appear properly.

mode. In P-AUTO mode, the camera settings are automatically adjusted

according to the shooting situation to create the best results.

Tip

a Turn the mode dial to

Check the video signal type before connecting to your TV.

NTSC: North America, Japan, Taiwan, Korea

PAL: European countries, China

a Turn the mode dial to

Mode dial

The setup menu appears.

QUICK

VIEW

b Position the AF target mark on the subject.

abcd buttons

Turn the zoom lever to the T (U) or W (G) side to frame the subject.

OPEN

9 button

b Press a/c to select "VIDEO OUT."

VIDEO OUT

NTSC

Press d to enter the video signal type setting.

MODE RESET

PAL

Wide angle

Telephoto

(W/G)

(T/U)

Shooting mode

c Press a/c to select "NTSC" or "PAL."

d Press 9.

The video signal type is set, and the screen returns to the setup menu.

c Press and hold the shutter button gently (half-press).

Viewing pictures

The green indicator lights up when the focus and exposure are locked.

Press h after shooting to see the

If the subject is not in focus, the green indicator blinks. Recompose the

picture, and hold down the shutter button until the green indicator

last shot image. To return to the

lights up.

shooting mode, press h again.

Green indicator

100 00-0009

Half-press

Zoom lever

Shutter button

d Press the shutter button all the way (full-press).

Mode dial

VIEW

QUICK

The picture is taken and the card access lamp blinks. The shot image is

Card access lamp

stored onto the card.

OPEN

Erasing images

You can erase unwanted images on the card.

Full-press

a Display the image to be

QUICK

VIEW

erased.

Card access lamp

b Press S.

Note

The "ERASE" screen appears.

Do not open the battery/card cover while the card access lamp is blinking. The

picture being written may not be stored or the stored image data may be damaged.

c Press a/c to select "YES."

d Press 9.

The selected image is erased.

AF target mark

Note

Erased images cannot be restored.

Number of shots remaining

Record mode

Using images with your computer

With the supplied OLYMPUS Master software installed, you can transfer,

manage and edit camera images with your computer.

QUICK

VIEW

h button

Connecting the camera to a computer

0009

SIZE:2288 1712

SIZE:2288

1712

OPEN

+2.0

OPEN

Connect the camera to your computer, and you can transfer images on the

Displays the previous image.

card to your computer.

'04.12.03.14:03

'04.

12.03.14:03

a Install OLYMPUS Master.

Displays the next image.

A Insert the supplied software CD-ROM into the CD-ROM drive of

your computer. The setup screen appears.

B Click [OLYMPUS Master].

C Click [Next], and operate according to the window messages.

D When the installation is complete, remove the CD-ROM from the

CD-ROM drive, and restart the computer.

abcd

b Insert the supplied USB cable into the USB port on your

QUICK

VIEW

buttons

computer.

9 button

OPEN

S button

USB mark

USB cable

USB port

Note

It is recommended to use the AC adapter as a power source when using the camera

with a computer.

c Insert the other end of the USB cable into

the USB port on the cradle.

A/V OUT

(MONO)

DC IN 5V

USB

d Set the camera on the cradle

Select this mark.

with the multi-swing display

opened.

e Select "PC" in the "PC/PRINTER" screen,

PC / PRINTER

then press 9.

SEL.PRINT

EXIT

SELECT

f The computer recognizes the camera as a new device.

Windows 98SE/Me/2000: The camera is recognized as a removable

disk.

Windows XP: A window is displayed, prompting you to select the

operation for image ﬁ les. Click [CANCEL].

Mac OS X: The iPhoto application is activated when the camera is

connected for the ﬁ rst time. Terminate it.

Note

When the camera is connected to a computer, it cannot be used as a camera.

g Start OLYMPUS Master.

Double click the [OLYMPUS Master] icon to display the main menu

window.

For details on functions and operations, refer to the instruction manual

for OLYMPUS Master.