Olympus Digital Wave Player VN-120PC Instructions - Page 2

Browse online or download pdf Instructions for Voice Recorder Olympus Digital Wave Player VN-120PC. Olympus Digital Wave Player VN-120PC 4 pages. Digital voice recorder
Also for Olympus Digital Wave Player VN-120PC: Instructions (2 pages), Driver Manual (1 pages), (French) Mode D'emploi (2 pages)

Print Page

Olympus Digital Wave Player VN-120PC Instructions

The feature of the Digital Wave Player

With the supplied Olympus Digital Wave Player software, you can download files to your

computer.

Functions provided by Olympus Digital Wave Player are summarized

below:

• PC storage and management of voice recordings made with the recorder.

• Playback of files.

• Recording of sound files directly on a PC using the recorder with a USB terminal

connector.

Y Operating Environment

Operating system:

Microsoft Windows 98/Me/2000Professional (hereinafter referred to as

Windows 2000)/XP Professional, Home Edition

PC:

IBM PC/AT-compatible machine

CPU:

Intel Pentium 166 MHz or more

RAM:

32MB or more

Hard-disk space:

25MB (additional space required to store sound files)

Sound card:

Creative Labs Sound Blaster 16 or any 100% compatible sound card

800 × 600 pixels min., 256 colors min.

Display:

CD-ROM drive:

2× CD-ROM

USB port:

At least one free port

Audio output jack:

Earphone or speaker output(s)

Note

USB support is not available under the following environments, even for PCs equipped with a

USB port: Windows 98/Me/2000/XP Professional, Home Edition upgraded from Windows 95

Installing Olympus Digital Wave Player

Before you connect the USB cable to the recorder and your PC, you must first install the

software.

Set the Olympus Digital Wave Player CD-ROM in the CD-ROM drive.

The Installation program will start automatically.*

* If the setup program does not start automatically, double-click the CD-ROM icon in the

Explorer window and double-click on the "setup.exe" icon.

Install Olympus Digital Wave Player by following the instructions displayed in the

setup windows.

The

icon appears in the task tray on the desktop.

Y Uninstalling Olympus Digital Wave Player

To uninstall Olympus Digital Wave Player, follow the procedure below.

Click the Windows [start] button.

Point to [All Programs], select [Olympus Digital Wave Player], and then click [Uninstall

Digital Wave Player].

Follow the on-screen instructions to uninstall Olympus Digital Wave Player.

Starting Olympus Digital Wave Player

When you connect the recorder to your PC with the supplied USB cable, Olympus Digital

Wave Player starts, and the main window appears automatically.

In such a case, batteries are not necessary for the recorder, because power is

supplied to the recorder from the connected PC via the USB cable.

Note

Release the hold switch of the recorder before connecting the USB cable to a PC.

USB cable

PC (USB) terminal

To use Olympus Digital Wave Player without connecting the recorder to the PC, or if Olympus

Digital Wave Player does not start automatically when you connect the recorder to the PC,

click the [start] button, point to [All Programs], select [Olympus Digital Wave Player] then click

[Digital Wave Player].

To exit Olympus Digital Wave Player, click the

then click [Exit Digital Wave Player].

Notes

• When you start Olympus Digital Wave Player for the first time by connecting the recorder to

the PC after installation, it may take a few minutes to start.

• Do not use any USB cable other than the one supplied.

• Do not disconnect the USB cable before file transfer or recording is completed.

• When the recorder is connected to a PC, the power will be supplied from the USB cable.

English

To the PC's (USB) port

button on the window, or click [File], and

English