Olympus Digital Wave Player VN-120PC Інструкція - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція для Диктофон Olympus Digital Wave Player VN-120PC. Olympus Digital Wave Player VN-120PC 4 сторінки. Digital voice recorder
Також для Olympus Digital Wave Player VN-120PC: Інструкція (2 сторінок), Посібник водія (1 сторінок), (Французька) Mode D'emploi (2 сторінок)
Друкувати сторінку
The feature of the Digital Wave Player
With the supplied Olympus Digital Wave Player software, you can download files to your
computer.
Functions provided by Olympus Digital Wave Player are summarized
below:
• PC storage and management of voice recordings made with the recorder.
• Playback of files.
• Recording of sound files directly on a PC using the recorder with a USB terminal
connector.
Y Operating Environment
Operating system:
Microsoft Windows 98/Me/2000Professional (hereinafter referred to as
Windows 2000)/XP Professional, Home Edition
PC:
IBM PC/AT-compatible machine
CPU:
Intel Pentium 166 MHz or more
RAM:
32MB or more
Hard-disk space:
25MB (additional space required to store sound files)
Sound card:
Creative Labs Sound Blaster 16 or any 100% compatible sound card
800 × 600 pixels min., 256 colors min.
Display:
CD-ROM drive:
2× CD-ROM
USB port:
At least one free port
Audio output jack:
Earphone or speaker output(s)
Note
USB support is not available under the following environments, even for PCs equipped with a
USB port: Windows 98/Me/2000/XP Professional, Home Edition upgraded from Windows 95
Installing Olympus Digital Wave Player
Before you connect the USB cable to the recorder and your PC, you must first install the
software.
1
Set the Olympus Digital Wave Player CD-ROM in the CD-ROM drive.
The Installation program will start automatically.*
* If the setup program does not start automatically, double-click the CD-ROM icon in the
Explorer window and double-click on the "setup.exe" icon.
2
Install Olympus Digital Wave Player by following the instructions displayed in the
setup windows.
The
icon appears in the task tray on the desktop.
Y Uninstalling Olympus Digital Wave Player
To uninstall Olympus Digital Wave Player, follow the procedure below.
1
Click the Windows [start] button.
2
Point to [All Programs], select [Olympus Digital Wave Player], and then click [Uninstall
Digital Wave Player].
3
Follow the on-screen instructions to uninstall Olympus Digital Wave Player.
Starting Olympus Digital Wave Player
When you connect the recorder to your PC with the supplied USB cable, Olympus Digital
Wave Player starts, and the main window appears automatically.
In such a case, batteries are not necessary for the recorder, because power is
supplied to the recorder from the connected PC via the USB cable.
Note
Release the hold switch of the recorder before connecting the USB cable to a PC.
USB cable
PC (USB) terminal
To use Olympus Digital Wave Player without connecting the recorder to the PC, or if Olympus
Digital Wave Player does not start automatically when you connect the recorder to the PC,
click the [start] button, point to [All Programs], select [Olympus Digital Wave Player] then click
[Digital Wave Player].
To exit Olympus Digital Wave Player, click the
then click [Exit Digital Wave Player].
Notes
• When you start Olympus Digital Wave Player for the first time by connecting the recorder to
the PC after installation, it may take a few minutes to start.
• Do not use any USB cable other than the one supplied.
• Do not disconnect the USB cable before file transfer or recording is completed.
• When the recorder is connected to a PC, the power will be supplied from the USB cable.
English
PC
To the PC's (USB) port
button on the window, or click [File], and
Y
Y
,
,
*
Y
Y
English
*