Olympus BH2 Series Teardown, Cleaning And Reassembly - Page 21

Browse online or download pdf Teardown, Cleaning And Reassembly for Microscope Olympus BH2 Series. Olympus BH2 Series 45 pages. Phase contrast
Also for Olympus BH2 Series: Troubleshooting & Adjustment Manual (46 pages), Complete Teardown, Cleaning, And Reassembly (23 pages), Complete Teardown, Cleaning, And Reassembly (40 pages), Manual (6 pages), Installation Manual (9 pages)

Print Page
Olympus BH2 Series Teardown, Cleaning And Reassembly

Reinstall the Nosepiece Slide Mount (BHS/BHT)

Reinstall the nosepiece slide mount onto the BHS/BHT
pillar arm per the following.

Reinstall the Slide-Mount Block

Place the nosepiece slide mount into position on the
BHS/BHT pillar arm. See
Figure 68 – Place the nosepiece slide mount into position
Carefully align the three holes in the viewing head
recess of the BHS/BHT pillar arm with the three tapped
holes in the nosepiece slide mount base. See
Figure 69 – Align drilled holes with tapped holes
Using a suitable JIS screwdriver, reinstall the three
m2.6x5 screws to secure the nosepiece slide mount to
the BHS/BHT pillar arm (see
Figure 70 – Secure nosepiece slide mount with screws
Teardown, Cleaning, and Reassembly of the Miscellaneous Parts of the Olympus BH-2 Microscope Frames
Figure
68.
Figure
Figure
70).

Reinstall the Slide-Mount Locking Thumbscrew

Apply a light coating of grease to the threads of the
nosepiece slide-mount locking thumbscrew (see
71). Wipe away any excess grease.
Figure 71 – Lightly grease the thumbscrew threads
Carefully reinstall the nosepiece locking thumbscrew
into the tapped hole in the BHS/BHT pillar arm (see
Figure
72). Wipe away any visible grease squeeze-out.
69.
Figure 72 – Reinstall the nosepiece locking thumbscrew

Nosepiece Slide Mount is Ready for Use

The nosepiece slide mount and lock screw are now
ready to provide years of trouble-free service (see
Figure
73).
Figure 73 – Newly serviced slide mount ready for use
Figure
Revision 1
Page 21 of 45