AXIWI AT-350 User Manual - Page 2

Browse online or download pdf User Manual for Conference System AXIWI AT-350. AXIWI AT-350 2 pages. 6 persons two-way (duplex) communication

Print Page

With the AXIWI communication system, you have to setup 1 unit as a 'Master'. The

other units have to be set up as a 'Submaster' or a 'Follower', depending if you want

to be able to talk continuously or incidentally. In the 'Submaster' mode your spea-

king function is always activated. In the 'Follower' mode you have to manually

activate and deactivate your speaking function. 

In order to set up the AXIWI communication system, you have to make the

following installation steps.

Before you start, first plug in

the headsets.

Set up as Master

1.Push and hold the volume up

button.

2.Then push the 'on/off' button (At least

2 seconds) while pushing the volume

button

at the same time.

3.The AXIWI unit is set up in the

'Master' mode; the letter 'M' appears

at the left top of the display.

Set up as Submaster

1.Push and hold the volume

2.Then push the 'on/off' button (At least

2 seconds) while pushing the volume

button

at the same time.

3.The AXIWI unit is set up as

'Submaster'; the speaking function of

the AXIWI is continuously activated.

On/off button

USB-port

Headset port

Set up as Follower

1.Push the 'on /off' button for at least 2

seconds. The AXIWI is

set up as Follower.

2.With the speaking button on the front,

the speaking function can be

activated and deactivated.

Press the speaking button briefly to

activate (and again) to deactivate the

speaking function.

3.When the speaking function is

activated a microphone will appear in

the display.

button.

Change the channel

Press the M-button briefly. The

channel will blink. With the up

down button you can change the

channel. You confirm the channel with

the M-button.

Speaking button

Mode button

Volume +

Volume -