Olympus CX21LED Instructions Manual - Page 22

Browse online or download pdf Instructions Manual for Microscope Olympus CX21LED. Olympus CX21LED 28 pages. Biological microscope

Print Page

Reflection Mirror CH20-MM

}The reflection mirror is designed to be used in microscopic observation in a location where power supply is not available.

It makes it possible to use the natural light in place of the LED illumination.

Fig. 19

Fig. 20

# The microscope should be installed near a window, in a place that

is not exposed to direct sunlight.

The eyepieces should be oriented toward the rear so that the reflec-

tion mirror receives the bright light. Loosen the observation tube

clamping knob and rotate the tube by 180°.

1. Fit the reflection mirror in the window lens of the microscope frame by

aligning the mounting tab.

2. The reflection mirror 1 should be pointed toward the bright area. While

observing the image through eyepieces, adjust the orientation of the

reflection mirror.

}A planar reflection mirror is used normally. However, if the image bright-

ness is uneven or the outside view is visible in the image, use a concave

reflection mirror.

}The standard 10X eyepieces are clamped using screws.

1. Using a small flat-blade screwdriver, loosen the clamping screw 1 of a

10X eyepiece and remove it.

2. Insert the WHC15X or WHC15X-H into the eyepiece sleeve and tighten

the clamping screw 1.

(Fig. 19)

(Fig. 20)