Olympus CX21LED 사용 설명서 - 페이지 22

{카테고리_이름} Olympus CX21LED에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CX21LED 28 페이지. Biological microscope

Reflection Mirror CH20-MM

}The reflection mirror is designed to be used in microscopic observation in a location where power supply is not available.

It makes it possible to use the natural light in place of the LED illumination.

Fig. 19

Fig. 20

# The microscope should be installed near a window, in a place that

is not exposed to direct sunlight.

The eyepieces should be oriented toward the rear so that the reflec-

tion mirror receives the bright light. Loosen the observation tube

clamping knob and rotate the tube by 180°.

1. Fit the reflection mirror in the window lens of the microscope frame by

aligning the mounting tab.

2. The reflection mirror 1 should be pointed toward the bright area. While

observing the image through eyepieces, adjust the orientation of the

reflection mirror.

}A planar reflection mirror is used normally. However, if the image bright-

ness is uneven or the outside view is visible in the image, use a concave

reflection mirror.

}The standard 10X eyepieces are clamped using screws.

1. Using a small flat-blade screwdriver, loosen the clamping screw 1 of a

10X eyepiece and remove it.

2. Insert the WHC15X or WHC15X-H into the eyepiece sleeve and tighten

the clamping screw 1.

(Fig. 19)

(Fig. 20)