Olympus CX21LED 사용 설명서 - 페이지 20

{카테고리_이름} Olympus CX21LED에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CX21LED 28 페이지. Biological microscope

ASSEMBLY

}Each standard set can be assembled by simply attaching the AC adapter and power cord.

Fig. 16

Fig. 17

Connecting the AC Adapter and

Power Cord

# Be sure to use the provided AC adapter Use of other AC adapter

may cause a malfunction.

The power cord and AC adapter cord are vulnerable when bent or

twisted. Never subject it to excessive force.

Make sure that the main switch 1 is set to "

necting the power cord.

Always use the power cord provided by Olympus. If no power cord is

provided, please select the proper power cord by referring to the

section "PROPER SELECTION OF THE POWER SUPPLY CORD" at

the end of this instruction manual.

1. Connect the output connector 2 of the AC adapter to the input connec-

tor 3 on the rear of the microscope.

Do not tilt the microscope to the rear. Doing so could damage the

output connector 2.

2. Connect the power cord's connector 4 to connector 5 firmly.

Be sure to supply power from a grounded, 3-conductor power outlet

using the proper power cord. If the power outlet is not grounded

properly, Olympus can no longer warrant the electrical safety perfor-

mance of the equipment.

3. Connect the power cord's plug 6 to a wall power outlet 7. (Fig. 17)

(Figs. 16 & 17)

" (OFF) before con-