Olympus SZX10 Instructions Manual - Page 26
Browse online or download pdf Instructions Manual for Microscope Olympus SZX10. Olympus SZX10 40 pages. Research high-class stereo microscope
Also for Olympus SZX10: Overview (24 pages), Instructions Manual (36 pages)
Print Page
a
c
b
a
b
22
Downloaded from
ManualsNet.com
b
a
search engine
6
Mounting the Eyepiece
When using the micrometer eyepiece disk, insert it in the
TIP
right eyepiece. (It may be inserted in the left eyepiece but the
description in this manual assumes that it is inserted in the
right eyepiece.)
1
Remove the eyepiece dust caps a and loosen the eyepiece clamping
screws b completely.
2
Gently insert the eyepieces of the same magnification c into the left
and right eyepiece sleeves all the way until they stop.
3
Tighten both eyepiece clamping screws b .
7
Mounting (Removing) the Stage Plate
Place the stage plate into the mounting hole on the base.
To remove, press the stage plate at the edge nearest to the pillar
with your fingertip. The opposite end will rise from the base so the
stage plate can be picked up easily.
8
Mounting the Specimen Holder
Use the specimen holder when you want to hold the
TIP
specimen so that it will not move.
Insert the specimen holder a into the two holes b on the
top surface of the base.
9
Positioning the Microscope Body on the Stand
Loosen the focusing assembly clamping knob a Slightly pivoting the
microscope body to the left and right, align the center of the objective
with the center of the stage plate b , then clamp the microscope body
with the focusing assembly clamping knob.