Olympus CKX-RFA Instructions Manual - Page 33

Browse online or download pdf Instructions Manual for Laboratory Equipment Olympus CKX-RFA. Olympus CKX-RFA 36 pages. Reflected fluorescence system

Print Page

PROPER SELECTION OF THE POWER SUPPLY CORD

If no power supply cord is provided, please select the proper power supply cord for the equipment by referring

to " Specifications " and " Certified Cord " below:

CAUTION: In case you use a non-approved power supply cord for Olympus products, Olympus can

no longer warrant the electrical safety of the equipment.

Voltage Rating

Current Rating

Temperature Rating

Length

Fittings Configuration

A power supply cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage

marked with an agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least

one of agencies listed in Table 1. In case you are unable to buy locally in your country the power supply cord

which is approved by one of the agencies mentioned in Table 1, please use replacements approved by any

other equivalent and authorized agencies in your country.

Country

Agency

Argentina

IRAM

Australia

SAA

Austria

ÖVE

Belgium

CEBEC

Canada

CSA

Denmark

DEMKO

Finland

FEI

France

UTE

Germany

VDE

Ireland

NSAI

Specifications

125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)

6A minimum

60°C minimum

3.05 m maximum

Grounding type attachment plug cap. Opposite terminates in molded-on

IEC configuration appliance coupling.

Table 1 Certified Cord

Certification

Country

Mark

Italy

Japan

Netherlands

Norway

Spain

Sweden

Switzerland

United

Kingdom

U.S.A.

REFLECTED FLUORESCENCE SYSTEM

Agency

IMQ

JET, JQA , TÜV,

UL-APEX / MITI

KEMA

NEMKO

AEE

SEMKO

SEV

ASTA

BSI

FOR CKX41

Certification

Mark