Olympus CX-DO Instructions Manual - Page 3

Browse online or download pdf Instructions Manual for Laboratory Equipment Olympus CX-DO. Olympus CX-DO 13 pages. Dual-viewing attachment

Print Page
1. Clean all glass components
by wiping gently with gauze. To remove fingerprints
or oil smudges, wipe with gauze
slightly moistened
with xylene or a mixture of ether (70%) and alcohol (30%).
A
Since both ether and alcohol are highly flammable,
be careful to keep these chemicals
away from open
fire and potential
sources of electrical
sparks, such as when the main switch is turned ON.
2. Do not attempt to use organic solvents to clean the non-optical components
of this attachment.
To clean these,
use a lint-free, soft cloth lightly moistened with a diluted neutral detergent.
3. Do not disassemble
any part of the dual-viewing
attachment
as this could result in malfunctions
or reduced
performance.
4. When not using the dual-viewing
attachment,
keep it covered with the provided dust cover.
If the dual-viewing
attachment
is used in a manner not specified in this manual, the safety of the user may be
imperiled.
In addition, the equipment
may also be damaged. Always operate the equipment
as outlined
instruction manual.
The following
symbols are used to set off text in this instruction
manual.
A
: Indicates that failure to follow the instructions
in the warning could result in bodily
harm to the user and/or damage to equipment
(including objects in the vicinity of the
equipment).
* : Indicates that failure to follow the instructions could result in damage to equipment.
Q : Indicates commentary
(for ease of operation and maintenance).
in this